7Plug the fan connector into the connector on the system board and replace the cable in the cable clamps. Make sure the cable does not interfere with airflow and will not be pinched when you close the cover.
8Close the case. See “Closing the case” on page 20.
9Reconnect the power cord and external peripherals, then turn on the system.
Replacing the control panel board
The control panel board is mounted on the front of the chassis, inside the front panel.
To replace the control panel board:
1Turn off the system and disconnect the power cord and all external peripherals.
2Open the case. See “Opening the case” on page 18 and “Preventing static electricity discharge” on page 17.
3Disconnect all cables from the control panel board. Note the location and orientation of each cable as you remove it.
4Remove the three screws that secure the control panel board to the front of the chassis, then remove the board from the server.
Replacing and Adding Internal Devices | 53 |