4Remove the diskette drive assembly by removing the two screws near the back of the drive.

Slots

Hooks

Hooks

5Slide the drive assembly back slightly to disengage the hooks on the drive bay from the slots on the diskette drive bracket, then pull the drive assembly out of the chassis.

6If necessary, set any jumpers on the replacement drive assembly. (See your drive documentation for proper drive jumper settings and cable orientation.)

7Replace the diskette drive assembly in the chassis. Make sure the hooks extend through the slots on the new bracket, then slide the diskette drive assembly forward.

8Secure the diskette drive assembly using the screws you removed in Step 4.

9Connect the power and data cables, making sure the cables are in their original positions.

10Close the case. See “Closing the case” on page 20.

11Reconnect the power cord and all other external peripheral devices, then turn on the computer.

Replacing and Adding Internal Devices

23