
Troubleshooting 7
Introduction
If the server does not operate correctly,
Troubleshooting checklist
Before turning on the system, make sure that:
■The power cord is connected to the power connector and an AC outlet.
■The AC outlet is supplying power.
■If a power strip is used, it is turned on.
■If the power supply has a voltage selection switch, that the voltage selection switch reflects the proper voltage.
Verifying your configuration
If the server is not operating correctly, the BIOS may contain an invalid configuration parameter. Open the BIOS Setup utility and check your configuration settings. (See “About the BIOS Setup utility” on page 61.)
Troubleshooting 79