9Select Other devices, then click Have Disk.

10Browse the SCCD to find 7450R.inf.

11Select the 7450R Driver.

12If the server does not reboot automatically, reboot the server.

13Setup ManageX (see “Setting up ManageX” on page 75).

Setting up ManageX

To setup ManageX:

1Run ManageX.

2Select WBEM Browser, Systems Management Server, then 7450R Components to see the server information.

This step displays the WBEM Object detail window. The data displayed in this window is not updated dynamically. To view the latest data, click the refresh button before you open the WBEM Object detail window.

3Select the Device Selector window.

4Click Devices to choose the server which will run ManageX.

5Click Apply.

6In the list of options on the left side of the screen, right-click Policies.

7Select All Tasks, then Set Directory.

8Accept the default installation directory \Program Files\7450R Agent.

9Click Policies, then Available.

10Right-click7450RSnmpTrap.mxw.

11Select All Tasks, then Install.

You can open the Message Reader to view the events. The Message Reader is dynamically updated every few seconds.

You can also modify the error limit values in \winnt\7450R.ini. However, you must stop the SNMP service and restart it when you are finished.

Managing the Server

75