8Remove the eight screws that secure the system board to the chassis, then lift the system board out of the chassis.

9Remove the new system board from its anti-static bag and set any jumpers that you may need to set for your configuration. See “System board” on page 6 and “Setting the system board jumpers and switches” on page 64.

10Place the new system board in the chassis.

11Replace the eight screws you removed in Step 8.

12Install the DIMM(s) and processor(s) in the new system board. See

“Replacing memory” on page 32, “Replacing the primary processor” on page 34, and “Replacing the secondary processor” on page 36.

13Reconnect the system cables to the appropriate connectors on the system board. See “System board” on page 6 for reference.

14Replace the riser card using the two screws you removed in Step 4. Make sure you seat the riser card connector securely onto the edge connector on the system board.

Replacing and Adding Internal Devices

59