European users
European directives
This Information Technology Equipment has been tested and found to comply with the following European directives:
■EMC Directive 89/336/EEC amending directive 92/31/EEC & 93/68/EEC as per
-EN
EN 55022:1994 Class B
EN
EN
- EN
EN
EN
EN
■Low Voltage Directive (Safety) 73/23/EEC as per EN 60950:1992(A1/A2/A3/A4/A11)
European telecommunication information (for products fitted with
Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/S/EC. Such marking is indicative that this equipment meets or exceeds the following technical standards:
CTR 21 (1998) - Attachment requirements for
Warning
Although this equipment can use either loop disconnect (Pulse) or DTMF (Tone) signaling, only the performance of the DTMF signaling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services. DTMF signaling also provides faster call setup.
This equipment has been approved to Council Decision
96