GE 2300 V, Medium Voltage GP Type G Drives - page 80

3-26 •
••
• Chapter 3 Paramters/Functions Innovation Series Medium Voltage GP Type - G Drives GEH-6385
The variables displa yed by the meters and the meter ranges can be modified by
configuring the following parameters:
Function configuration
Parameter Description
Keypad meter 1 sel Selects a floating-point variable that is displayed in
Meter #1 on the DDI Status screen.
Keypad meter 2 sel Selects a floating-point variable that is displayed in
Meter #2 on the DDI Status screen.
Keypad meter 3 sel Selects a floating-point variable that is displayed in
Meter #3 on the DDI Status screen.
Keypad meter 4 sel Selects a floating-point variable that is displayed in
Meter #4 on the DDI Status screen.
Keypad meter 1 range Selects the bar graph meter scaling for Met er #1.
Possible v alues are as follo ws (note that all bar
graphs are scaled in percent (%)):
0 to +100
-100 to +100
0 to +150
-150 to +150
0 to +200
-200 to +200
0 to +300
-300 to +300
Keypad meter 2 range Selects the bar graph meter scaling for Met er #2.
See Keypad meter 1 range for possible values.
Keypad meter 3 range Selects the bar graph meter scaling for Met er #3.
See Keypad meter 1 range for possible values.
Keypad meter 4 range Selects the bar graph meter scaling for Met er #4.
See Keypad meter 1 range for possible values.
Keypad meter 1 ref Selects an optional reference display for Meter #1. If
selected, the bar graph for this reference signal will be
displayed just above the bar graph for the feedback
signal. Both graphs will be displayed in the Meter #1
area as a split screen. The reference signal will only
be displayed if local mode is enabled. Keypad meter 1
ref can be disabled f rom the pick list .
Note When c hanging DDI meter configuration from the toolbox, fi rst save the
modified parameter s to the drive. Press the Menu button and then the Status button
on the DDI. This will cause the meters on the Status screen to update.