Genicom LN45, ML450 manual Reload, Option

GENICOM LN45 and Intelliprint mL450 User Guide

D-5

Frequently-used Server Commands

Command	Option(s)	Description
DEFINE SERVICE	TCPPORT string	Specifies a raw TCP listener socket for the
“name” option		service. Enter a socket number (4000 to
		4999) or the word none.
	TELNETPORT string	Specifies a TCP listener socket for the
		service. Unlike TCPport, this option
		performs Telnet IAC interpretation on the
		data stream. Enter a socket number (4000
		to 4999) or the word none.
INITIALIZE option	DELAY num	Schedules a reboot after num minutes. Enter
		a value from 0 to 120.
	CANCEL	Cancels an impending initialization.
	FACTORY	Reboots the server to its factory default
		settings.
	NOBOOT	Forces the Server to stop in Boot
		Configuration Mode rather than fully
		rebooting.
	RELOAD	Forces the Server to download new
		operational code and reprogram its
		flash-ROM.
LOGOUT option	<nothing>	Logs out the current port (the port that
		issued the command).
	PORT num	Logs out the specified port.
PURGE SERVICE	LOCAL	Removes the definitions of all local services.
option
	“service”	Removes the definition of the specified
		service.
SET PRIVILEGED		Enters privileged mode, provided the user
		enters the proper privileged password when
		prompted.
{SHOWMONITOR} QUEUE		Displays the status of Server queues once
		(Show) or continually every three seconds
		(Monitor).
{SHOWMONITOR} SERVER		Displays Server information once (Show) or
		continually every three seconds (Monitor).
{SHOWMONITOR}	<nothing>	Displays characteristics about all configured
SERVICE option		services once (Show) or continually every
		three seconds (Monitor).
	“service”	Displays only characteristics related to the
		named service.
ZERO COUNTERS	ALL	Zeroes all port, node, and Server counters.
option
	PORT num	Zeroes port counters for the specified port.

Aug 2001 Genicom Publication No. GEG-99126