D-2

GENICOM LN45 and Intelliprint mL450 User Guide

About this Appendix

This appendix lists some of the most frequently-used commands of the Print Server command set. More information about the command set, including additional options, can be found in the Ethernet Network Interface Manual on the Electronic Library CD-ROM.

Please note the following before continuing:

In this command set appendix the NIC is referred to as the Server.

Commands are divided into Server (general), Port, and Protocol sections. Within each section, com- mands are listed alphabetically.

Commands may require privileged user status. Enter Set Privileged, then enter the privileged pass- word when prompted.

When you enter a Define or Purge command, you must reboot the Server for the command to take effect.

When the abbreviated syntax “{ENDIS}” is shown, you must choose either Enabled or Disabled to complete the command.

Each section lists additional information needed to use the command table in that section.

Publication No. GEG-99126

Genicom

Aug 2001

Page 200
Image 200
Genicom ML450, LN45 manual About this Appendix