GENICOM LN45 and Intelliprint mL450 User Guide
Bitmap Graphics
Area to Check | Explanation |
|
|
Service Characteristics | Issue the Show Service Characteristics command. If |
| the service rating is zero, the parallel port is in use. |
| Verify that the PostScript characteristic and |
| appropriate protocols have been enabled on the |
| service. |
|
|
Port Counters | If PostScript jobs appear to print but nothing comes |
| out of the printer, verify the amount of data sent from |
| the host. Issue the appropriate print command from the |
| host system. After the job has completed, use the |
| Show Port 1 Counters command. |
|
|
Bitmap Graphics
If files that contain embedded bitmap graphics print incorrectly, it is because the bitmaps are being sent as actual binary data and binary data cannot be printed via serial or parallel interfaces.
Most major application packages have provisions to print using either “binary postscript” (for printers con- nected to the network via LocalTalk) or “hex postscript” (for printers connected to the network via a serial port or parallel port). If your application does not have this provision, ask the application vendor for an upgrade version or “patch” that will add the “hex postscript” function.
Technical Support
If you are experiencing an error that is not listed in the Troubleshooting appendix or if you are unable to fix the error, contact your point of purchase or Technical Support as listed in Appendix A.
When you report a problem, please provide the following information:
•Your name, and your company name, address, and phone number
•Printer model number
•Printer serial number
•Software version (use the Show Server command to display)
•Network configuration, including the information from a Netstat command
•Description of the problem
•Debug report (stack dump), if applicable
•Status of the unit when the problem occurred (please try to include information on user and network activity at the time of the problem).
!! !
Aug 01 | Genicom | Publication No. |
