Genicom ML450, LN45 manual Finish JAM Clear Area E

6-22

GENICOM LN45 and Intelliprint mL450 User Guide

Control Panel LCD Messages

4-5 FUSER ERROR	CALL SERVICE	Abnormally high Fuser	Service Call required
		temperature
4-5 IRREG. PAPER	CHECK TRAY 5	Irregular paper in Tray	Ensure the correct
		5 (see note 1)	paper is loaded in Tray
			5
4-5 PAPER JAM	CLEAR AREA A	Paper jam in Area A	Clear Paper Jam in
			Area A
4-6 PAPER JAM	CLEAR AREA A	Paper jam in Area A	Clear Paper Jam in
			Area A
4-9 FUSER ERROR	CALL SERVICE	Fuser fan defective	Service Call required
4-11 FINISH JAM	CLEAR AREA E	Paper didn’t pass	Clear paper jam in
		TRANSPORT entry	Area E
		sensor in specified
		time after reaching the
		sensor
4-12 FINISH JAM	CLEAR AREA E	Paper didn’t reach	Clear paper jam in
		TRANSPORT entry	Area E
		sensor in specified
		time after passing
		fuser exit sensor
4-13 FINISH JAM	CLEAR AREA E	TRANSPORT entry	Clear paper jam in
		sensor switched on	Area E
		while initializing finisher
4-16 FINISH JAM	CLEAR AREA E	Remaining paper	Clear paper jam in
		detected at	Area E
		TRANSPORT entry
		sensor
4-21 FINISH JAM	CLEAR AREA F	Paper didn’t pass	Clear paper jam in
		TRANSPORT exit	Area F
		sensor in specified
		time after reaching the
		sensor
4-22 FINISH JAM	CLEAR AREA F	Paper didn’t reach	Clear paper jam in
		TRANSPORT exit	Area F
		sensor in specified
		time after passing the
		TRANSPORT exit
		sensor.
4-23 FINISH JAM	CLEAR AREA F	TRANSPORT exit	Clear paper jam in
		sensor switched on	Area F
		while initializing finisher

Publication No. GEG-99126 Genicom Aug 01