GENICOM LN45 and Intelliprint mL450 User Guide
Installing a FLASH DIMM Module
4.Carefully insert a FLASH DIMM module in FLASH DIMM slot as shown below. When properly seated, gently push down on the DIMM until the white braces close onto the ends of the DIMM.
NOTE: To remove the FLASH DIMM, pull the white braces away from the ends of the DIMM until the DIMM snaps out of the slot.
5.Reinstall the controller assembly. Once firmly in place, push and hand tighten the thumbscrews in a clockwise direction.
Publication No. | Genicom | Aug 01 |
