Genicom ML450, LN45 manual Protocol Commands Options Description

D-6

GENICOM LN45 and Intelliprint mL450 User Guide

Protocol Commands

In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL

Protocol Commands

Command	Option(s)	Description
DEFINE PROTO	{ENDIS}	Enables or Disables the AppleTalk protocol
APPLETALK option		for the Server.
	ZONE newzone	Places the Server in a zone other than the
		default.
DEFINE PROTO IP	{ENDIS}	Enables or Disables the TCP/IP protocol for
option		the Server.
	GATEWAY ipaddr	Same as “DEFINE SERVER GATEWAY
		ipaddress” on page D-3.
	IPADDRESS ipaddr	Same as “DEFINE SERVER IPADDRESS
		ipaddress” on page D-3.
	LOADHOST ipaddr	Same as “DEFINE SERVER LOADHOST
		ipaddress” on page D-3.
	NAMESERVER ipaddr	Specifies the IP address of the host that will
		resolve text host names into their numeric
		equivalents for TCP/IP connection attempts.
DEFINE PROTO LAT	{ENDIS}	Enables or Disables the LAT protocol for the
option		Server.
DEFINE PROTO	{ENDIS}	Enables or Disables the NetWare (IPX)
NETWARE option		protocol for the Server.
	DSCONTEXT string	Configures the NetWare Directory Services
		context in which the Server is located. For
		more information about NDS contexts, see
		your NDS documentation.
	DSLICENSE string	Configures the NetWare Directory Services
		license needed to enable NDS on your Server.
		Enter the license string obtained from your
		dealer or Lantronix.
	DSTREE string	Configures the NetWare Directory Services
		tree in which the Server is located. For more
		information about NDS trees, see your NDS
		documentation.
DEFINE PROTO	NATIVE	Configures the Server to use the “native
NETWARE		mode” frame format.
ENCAPSULATION
	ETHER_II	Configures the Server to use Ethernet v2
option {ENDIS}
		frame format.
	802_2	Configures the Server to use 802.2 frame
		format with NetWare SAPs.
	SNAP	Configures the Server to use 802.2 frame
		format with SNAP SAPs.

Publication No. GEG-99126 Genicom Aug 2001