Genicom LN45, ML450 manual Frequently-used Server Commands Options Description

GENICOM LN45 and Intelliprint mL450 User Guide

D-3

Server Commands

Frequently-used Server Commands

Command	Option(s)	Description
DEFINE SERVER BOOTP {ENDIS}		Enables or disables querying for a BOOTP
		host at system boot time.
DEFINE SERVER DHCP {ENDIS}		Enables or disables querying for a DHCP
		host at system boot time.
DEFINE SERVER GATEWAY ipaddress		Specifies the host to be used as a TCP/IP
		gateway to forward packets between
		networks. Enter an IP address.
DEFINE SERVER	BOTH	Enables incoming LAT and Telnet
INCOMING option		connections.
	LAT	Enables only incoming LAT connections.
	NONE	Disables incoming connections.
	TELNET	Enables only incoming Telnet connections.
	PASSWORD	Causes the server to prompt for a password
		for all incoming connections.
	NOPASSWORD	Allows connections to be established
		without prompting for a password.
DEFINE SERVER IPADDRESS ipaddress		Sets the Server’s network IP address.
DEFINE SERVER LOADHOST ipaddress		Specifies the TCP/IP host from which the
		Server requests its run-time code.
DEFINE SERVER LOGIN PASSWORD		Sets a new password that will be required
		before incoming logins are accepted. You
		will be prompted for the new password (up
		to 6 alphanumeric characters,
		case-insensitive).
DEFINE SERVER NAME “newname”		Specifies a new name for the Server.
		Names are restricted in length; generally a
		name of 11 or fewer characters is
		permissible.
DEFINE SERVER NETWARE LOADHOST server		Specifies the NetWare host from which the
		Server requests its run-time code. Enter a
		file server name of up to 11 characters.
DEFINE SERVER PRIVILEGED PASSWORD		Sets a new password that will be required
		for privileged user status. You will be
		prompted for the new password (up to 6
		alphanumeric characters, case-insensitive).
DEFINE SERVER RARP {ENDIS}		Enables or disables querying for a RARP
		host at system boot time.

Aug 2001 Genicom Publication No. GEG-99126