To enable it, you just need to press OK [or
click with touch-pen] to conform “Time Hint”
option, and then press the left soft key [or
click with touch-pen] to save it.
1.4.9 Hide Code
When this function is enabled, your cell
phone number will be hidden from the
phone’s screen that you are calling. To
enable it, you just need to press OK [or click
with touch-pen] to choose “Hide Code”
option, and then press the left soft key [or
click with touch-pen] to save it.
Note: This function needs the support
from the network.
1.5 Call Forward
1.5.1 To Home
1.5.1.1 Function Introduction:
If the user has enabled “To Home” at
the present time, all the incoming calls will
be forwarded to the home telephone within
the set “Backtime” in the set “mode”.
1.5.1.2 Set
Enter the Option of Call Forward and
choose “To Home”; here the user can set as
his wish the home phone number, “Back
Time” and “Mode”. After set, press “Save” to
save the set or press “Cancel” to go back to
the up menu.
1.5.1.3 Effect
1. After setting “To Home” and “Back
Time” ----give the key of 3 a long
press, then conform to effect “To
Home”.
2. If not yet set “To Home” or “Back
Time”--- give the key of 3 a long
press to conform, and a hint will
appear that the “To Home” or “Back
Time” is not yet enabled, and you
need to enter the Call Forward to
pre-set.
1.5.1.4 Cancel
Enter “Call Forward” in “Call Set” and
conform “ Cancel All Forwards”
1.5.2 To Company
1.5.2.1 Function Introduction
When the user enable “ To