Henny Penny EEG-144, EEG-142, EEG-141, EEG-143 warranty Set-Up Mode

	Model EEG-141, 142, 143, 144
3-2. SET-UP MODE	Upon initial start-up, the controls will ask to confirm the settings for
	the fryer.

When the main power switch is turned on, “OFF” shows in both

displays. Press on either side and *SETUP* *ENTER CODE* shows in the displays. Press 1, 2, 3, and “LANGUAGE” shows on the left display, “ENGLISH” on the right display.

Use or buttons to change the operation display to, “FRANCAIS”, “ESPANOL”, “PORTUG”, “DEUTSCHE”, “SVENSKI”, “RUSSIAN”.

Press to continue with the other set-up items which include:

•TEMP FORMAT - oF or oC

•TIME FORMAT - 12-HR or 24-HR

•ENTER TIME - Time of day (use product buttons to change)

•ENTER TIME - AM or PM

•DATE FORMAT - MM-DD-YY or DD-MM-YY

•ENTER DATE - Today’s date (use product buttons to change)

•DAYLIGHT SAVING TIME - 1.OFF; 2.US (2007 & after); 3.EURO; 4.FSA (US before 2007)

•FRYER TYPE - ELEC or GAS

•VAT TYPE - FULL OR SPLIT

•AUTOLIFT ENABLED? - NO LIFT or YES LIFT

•BULK OIL SUPPLY - YES or NO

•BULK OIL DISPOSE? - YES or NO

•S/N - Shows serial number of the unit or can be recorded (THIS

SERIAL NUMBER SHOULD MATCH THE SERIAL NUMBER ON THE DATA PLATE, ON THE DOORS.)

•2nd LANGUAGE - By setting a second language in the controls,

2 languages can now be easily chosen by pressing during normal operation.

One language shows in the left display and the second language shows in the right display. Pressing the √ button under the desired language, selects that language seen in displays.

• 2nd VOLUME - By setting a second volume in the controls,

2 volumes can now be easily chosen by pressing twice during normal operation.

One volume setting shows in the left display (NONE to 10; 10 being the loudest) and the second volume shows in the right display. To select the volume, press the √ button under the desired volume .

• SETUP COMPLETE

Unless otherwise indicated, use or to change settings.

The Setup Mode can also be accessed by re-initializing the controls, in Special Program Mode, in Level 2 programming (SP-3).

3-5 809