Henny Penny EEG-141, EEG-142 Discarding Oil From Vat Using Optional Bulk Oil Dispose System

3-14. DISCARDING OIL FROM VAT USING OPTIONAL BULK OIL DISPOSE SYSTEM

Figure 1

Figure 2

1009

Model EEG-141, 142, 143, 144

1.Connect the female quick disconnect, that is attached to the hose in the rear of the open fryer, to the correct male quick disconnect at the wall. Once attached, the hose can remain connected unless the open fryer is moved. Figures 1 & 2.

“BULK OIL DISPOSE?” in the Special Program Mode or Set-Up Mode, must to set to “YES” for the Bulk Oil Dispose System to operate. Also, a password code step (1, 2, 3) can be added in Special Programming, SP-27.

2.	Press and hold	(left or right for split vats) until display
	shows“*FILTER MENU*”, along with
	“1.EXPRESS FILTER?”.
3.	Press and release	button twice until display shows

“3.DISPOSE”. Press √ button and display shows“DISPOSE?” “YES NO”, or enter code 1, 2, 3, if SP-27 is set to YES.

4.Press √ button and “DRAIN VAT?” YES NO” shows in display Press X button if drain pan already has oil in it. Skip to step 8.

5.Press √ button and display shows “OPEN DRAIN”. Pull-out on drain knob to open drain and display shows “DRAINING”. Oil now drains from the vat into drain pan.

6.Display shows “VAT EMTY “YES NO”. Verify that vat is empty, and press √ button.

7.Display shows “CLN VAT COMPLETE” “YES NO”. Once vat is clean, press √ button.

8.Display shows “DISPOSE” and then “√=PUMP” “X=DONE. Press √ button and oil is pumped from the drain pan to the bulk oil container.

9.When all the oil is pumped from the pan, press X button(STOP)

10.DisplayX shows “DISPOSE” and then “√=PUMP” “X=DONE. Press button and close drain.

11.Display shows “MANUAL FILL VAT” (or “FILL VAT FROM BULK if equipped), followed by “IS POT FILLED?”, along with

“YES NO”. Fill the vat to the lower indicator line on the rear of the vat and then press √ button. See Filling or Adding Oil instructions from Section 3-3.

Fryer returns to normal operation.

3-16