Honeywell HRDE4X4 manual Recording Schedules, Motion Zone Setup Screen

Figure 3-5 Motion Zone Setup Screen

Selected zones

Note Only selected zones will trigger motion recording.

Recording Schedules

To set up a recording schedule, select SCHEDULE in the RECORD menu.

Use the arrow buttons to navigate through the items and set the recording schedule.

Figure 3-6 Recording Schedule Setup Screen

You can schedule recording in one hour increments from 0 to 24 (0:00 to 24:00). You can select individual blocks of time, blocks of time for all channels, entire channels, or the entire schedule. Motion recording, sensor recording and continuous recording can be used exclusively for the schedule, or mixed as needed. See Table 3-5for four ways to set the schedule.

To set up a recording schedule, select SCHEDULE in the record menu. Use the arrow buttons to select one of the items in Table 3-5. Then press SEL to toggle and select the recording method required (C = Continuous, M = Motion, S = Sensor, - = No recording).

Rev 2.00	17	Document 900.0399
		03/06