Honeywell HRDE4X4 manual Network Setup Fields Cont’d, Ddns Server, Name Send E-MAIL, Mail Address

Table 3-7	Network Setup Fields (Cont’d)
Field	Description
DDNS SERVER	Enter or edit the DDNS server name.
NAME	Note This option only appears if DDNS is enabled.
SEND E-MAIL	Enable/disable sending e-mails reporting the assigned dynamic IP
	address of the DVR. Once enabled the MAIL ADDRESS and MAIL
	SERVER IP settings become available. Enter the appropriate email
	address and server information to enable sending e-mail server IP
	reports.
	If the network is linked with DHCP, which supports dynamic IP
	addresses, the DVR can send out the assigned dynamic IP
	address to the e-mail address set by the user.
	Mail Address
	User can set an e-mail address for receiving the dynamic IP
	address assigned by the DHCP server.
	Mail Server IP
	Is the IP address of a Mail Server run by the Manufacturer. To
	receive the assigned dynamic IP address sent to the e-mail
	address set by the user on the DVR, the user has to apply this mail
	server IP address on the DVR.

Ports

When you connect one or more DVRs to a network through an IP sharing device, each device must have a unique RTSP port number for remote access to each unit from outside the LAN (Local Area Network). Also, the IP sharing device must be configured for port forwarding so that each port, when accessed on the IP sharing device, will forward to the appropriate DVR.

Note This port number is listed next to the PORT menu option in the Network Setup screen. If you plan to access the DVR units only from within the same LAN, the RTSP port does not have to be changed.

Network Types

There are three network types available. Each type requires different settings.

LAN

To use the LAN option when connecting the DVR to a network, the following information is required. See your network administrator if you do not have this information.

IP The fixed IP address of the DVR unit

Gateway The IP address of the Gateway

Rev 2.00	23	Document 900.0399
		03/06