Honeywell HRDE4X4 manual Setting System Parameters

	Table 3-5	Schedule Recording Setup Fields
Field		Description
ALL		Selected recording mode is applied to the entire time zone and all
		channels (cameras 1 to 4).
CH1 to CH4		Selected recording mode is applied to the entire time zone for the
		specified channel.
Vertical Bar		Selected recording mode is applied to the entire channel for the
		selected time zone.
		Each vertical bar corresponds to one hour.

-Individual Block of Selected recording mode is applied to the selected 1-hour

Time increment for the selected channel.

Setting System Parameters

Use the System Setup screen to input system parameters.

Use the UP and DOWN arrow controls to navigate through the menu items and use the LEFT and RIGHT arrow controls to change the value of the menu items.

Figure 3-7 System Setup Screen

Follow Table 3-6to set global System parameters.

Table 3-6 System Setup Fields

Field	Description
DVR ID	Set the name of the DVR (see Figure 3-8).
	Press SEL, use the LEFT and RIGHT arrow controls to navigate
	through the position for each alphanumeric character. Use the UP
	and DOWN arrow controls to change the selected character. Press
	SEL to confirm the name.
DESCRIPTION	Press SEL to view system information (System version, storage
	capacity, IP address and MAC address. See Figure 3-9).
LOAD SETUP	Select ON to reset the system to the factory default settings.
DEFAULT
Rev 2.00	18	Document 900.0399
		03/06