![](/images/new-backgrounds/1204921/20492199x1.webp)
Table | Live Viewing Interface Controls |
Interface Control | Description |
|
|
| Displays the current date and time when viewing live |
| video. |
|
|
| Click to Connect to the DVR. |
If you click Connect, this Connect pop up window appears. Enter the IP Address and the Port number. Then select the Protocol type and enter the network Password. Click OK to initiate the connection.
Caution Port No: It should be the same as the DVR’s port number (the default port number is 5445 on both DVR and RAS).
Caution Password: It should be the same as the DVR’s network password (the default password is 1111), set in the System menu on your DVR.
Remote access should be set to ON in the Network
Setup menu on the DVR.
Note Maximum of 16 connection entries.
Click to Disconnect from the DVR.
Note This button only appears when you are remotely connected to a DVR.
Click to open the Local Search user interface. See Search and Playback Viewing, page 44, for information on searching the hard drive of the local PC for recorded video.
Click to open the Remote Search user interface. See Search and Playback Viewing, page 44, for information on searching the hard drive of the remotely connected DVR for recorded video.
Click to open the Live Video user interface.
Click to Lock all the operations on the DVR.
Note When this button is clicked it changes to the
Unlock button.
Rev 2.00 | 42 | Document 900.0399 |
|
| 03/06 |