Data Field Descriptions
!The features programmed in Field ✻91 differ between LYNXR models. Ensure you use the correct option for the model you are installing!
✻91 | LYNXR/LYNXR24 | For LYNXR/LYNXR24, this option is used to enable the Long Range | |
Long Range Radio/Alarm Audio | Radio, Alarm Audio Verification and/or Remote Phone Control options. | ||
| If Long Range Radio (0) is selected, trigger output (terminal screw #8) | ||
| Verification (AAV) Trigger/Remote Phone | ||
| will generate a steady signal for burglary alarm (a single 3 to | ||
| Control | pulse for all types of silent alarms) or a temporal signal for fire alarm. | |
| 0 = long range radio trigger only | (Refer to Long Range Radio Installation Instructions for appropriate | |
| 1 = AAV and remote phone control | wiring.) Alarm Audio Verification requires the installation of the | |
| |||
| 2 = long range radio trigger and remote phone control | ||
| Notes: (1) If Long Range Radio is being connected, Alarm Audio | ||
| 4 = AAV only | ||
| Verification cannot be used. | ||
|
|
| |
| Notes: | For UL installations Alarm Audio Verification | (2) In order to activate the remote phone control feature and |
| defeat an answering machine, ensure that the correct ring | ||
|
| cannot be used. Alarm Audio Verification will only | detection count (“15”) has been programmed in field ✻95. |
|
| function when Contact ID® is selected. | (3) Remote phone session will be terminated if a report must |
|
|
| be sent. |
|
|
| (4) A Long Range Radio cannot be connected f AAV is selected. |
|
|
| (5) Alarm Audio Verification will only function when Contact |
|
|
| ID® is selected and cannot be used for UL installations. |
|
|
| (6) If an alarm will be reported to primary and secondary |
|
|
| phone numbers, AAV can only function via the secondary |
|
|
| number. |
|
|
| (7) If an alarm will be reported to a pager |
|
|
| to follow me phone number |
|
|
| cannot be used. |
|
| For | |
| Alarm Audio Verification (AAV)/Remote | Verification and/or the Remote Phone Control features. | |
| Notes: (1) In order to activate the Remote Phone Control feature and | ||
| Phone Control | ||
| defeat an answering machine, ensure that the correct ring | ||
| 0 = none | detection count (“15”) has been programmed in field ✻95. | |
| 1 = AAV and remote phone control | (2) Remote phone session will be terminated if a report must | |
| 2 = remote phone control only | be sent. | |
| (3) Alarm Audio Verification will only function when Contact | ||
| 4 = AAV only | ||
| ID® is selected. AAV cannot be used for UL installations. | ||
|
|
| |
| Notes: | (1) For UL installations alarm audio verification cannot | (4) If an alarm will be reported to primary and secondary |
|
| be used. Alarm Audio Verification will only function | phone numbers, AAV can only function via the secondary |
|
| when Contact ID® is selected. | number. |
|
| (2) AAV and Remote Phone Control features can only | (5) If an alarm will be reported to a pager |
|
| be used if the central station or remote phone | to follow me phone number |
|
| supports DTMF commands. | cannot be used. |
|
|
| |
|
| (3) No programming is required if connecting an |
|
|
| ALARMNET 7845C device because the option is |
|
|
| always enabled. |
|
|
|
| |
✻92 | Number of Reports In Armed Period | This option can be used to limit the number of messages (alarm & | |
0 = reports limited to a total of 10 | alarm restore reports) sent to the central station in an armed period. | ||
| UL installations: must be 1 (unlimited reports) | ||
| 1 = unlimited number of reports | ||
|
| ||
✻93 | Flexible Callback | If enabled, the control will ignore the last 1, 2, or 3 digits of the | |
0 = no flexible callback | programmed callback number (field ✻94) during a single download | ||
| session. This allows the download operator to temporarily change the | ||
| 1 = last digit flexible | ||
| callback phone number by the number of digits selected, which allows | ||
| 2 = last 2 digits flexible | ||
| the control to call back similar, but different numbers during a single | ||
| 3 = last 3 digits flexible | ||
| session. For example, if downloading to a large number of controls, the | ||
|
|
| operator can command the controls to call back phone numbers 555- |
|
|
| 1111, |
|
|
| among several computers. |
|
|
| |
DOWNLOAD INFORMATION (✻94, ✻95) |
| ||
✻94 | Download Call Back Phone Number | This is the phone number the control will use to call back the | |
Enter up to 20 digits as follows: | downloading computer. | ||
| Do not fill unused spaces. End field by pressing ✻. To clear entries | ||
| 12 for “#”, # + 13 for a pause. | ||
| from field, press ✻94✻. | ||
|
|
| |
|
|
| |
✻95 | Ring Detection Count For Downloading/ | Enter “15” to select defeat answering machine mode. If an answering | |
Remote Phone Control | machine is on the premises, you need to dial the premises and hang up | ||
| on the first ring. Wait at least five (5) seconds (but no more than 22 | ||
| 0 = disable station initiated download and remote | ||
| seconds) and dial the premises phone number again. The control will | ||
| phone | ||
| pick up and announce “SYSTEM ENTER CODE” every three seconds. | ||
| |||
| Note: To enter a number higher than 9 you must first press the [#] key. | ||
|
| line | |
| 15 = defeat answering machine |
| |
|
|
|
|
|
|
|
|