Honeywell LYNXR Series, LYNXR-EN setup guide

✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 4 (devices 2-7 have no default values)

			Start			Stop
				Zone Type	Restore of	Zone type
Device Number	Action	Event	Zone List	System Operation	Zone List	System operation
1	2	2	1		2
8**	2			33		36

**NOTE: If using an X-10 Powerhouse Security SH10A siren as device 8, you must change the device action default to “3” if using default table 4.

✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 1 and 2 (devices 1-7 have no default values)

			Start			Stop
				Zone Type	Restore of	Zone type
Device Number	Action	Event	Zone List	System Operation	Zone List	System operation
8**	2			33		36

✻81 ZONE LIST FOR OUTPUT DEVICES DEFAULT TABLE: Applies To Default Table 1 - 4.

Zone List 1	28, 32
Zone List 2	29, 33
Zone List 3	2, 3

– 64 –