Wiring Connections
Wiring Overview
The following summarizes the connections required. Refer to the Wiring Connections paragraph and the Summary of Connections diagram on the inside back cover when making connections.
HARDWIRE ZONE
Supports 1 EOLR supervised zone using either closed circuit or open circuit sensors.
The
PHONE LINES
Use either the
EARTH GROUND
See Earth Ground paragraph.
LOCAL SOUNDER DISABLE JUMPER
Remove the shorting jumper (shunt) to disable local sounder, leaving only the external sounder active.
UL NOTE: Do not remove the shorting jumper (the shunt) for UL installations.
LONG RANGE RADIO
Compatible with the ALARMNET 7845C and 7720 Devices.
POWERLINE CARRIER DEVICES
Supports up to 8 Powerline Carrier Devices for turning on/off lights and appliances. Requires the use of an ADEMCO 1332X10 transformer.
MXXXX | K5108 |
AC TRANSFORMER Use the supplied
ADEMCO 1332X10 9VAC, 15VA
SOUNDERS
The system includes a
Bell: Use a
Piezo: Use a
This control complies with NFPA requirements for temporal pulse sounding of fire notification appliances.
Temporal pulse sounding for a fire alarm consists of the following: 3 pulses – pause – 3 pulses – pause – 3 pulses. . .
Wiring Connections
1.Make Earth Ground Connection - The designated earth ground terminal (1) must be terminated in a good earth ground for the lightning transient protective devices in this product to be effective. The following are examples of good earth grounds available at most installations:
Metal Cold Water Pipe - Secure a
AC Power Outlet Ground - Available from
equivalent, available at most electrical supply stores.
a.Connect terminal 1 to a good earth ground.