✻55 Enabling the 5842 Wireless Dialer
While in Program mode, press ✻55 to enter Wireless Dialer Programming Feature.
The following explains the ✻55 prompts in detail. The left two columns identify the prompts and list the available entries for each. The
Note: You may find it convenient to adjust the volume setting before entering the Programming Mode. This will allow you to clearly hear feedback announcements or system beeps.
|
|
| Enable the wireless dialer | Enter [1] to enable the 5842 Wireless dialer. Press [✻] to advance to next |
| Ed |
| [✻] = continue | field. |
|
|
| ||
|
| 0 = disable | Enter [0] to exit mode. The prompt “55” blinks, indicating the mode is | |
|
|
| 1 = enable | |
|
|
| inactive. Press [✻] + any field number to go to that field. | |
|
|
|
| |
|
|
|
|
|
|
|
| Enable trouble reports | If selected, the following 5842 trouble reports will be enabled: |
| Er |
| [✻] = continue | • Loss of RF link with 5842 Wireless Dialer |
|
| • Tamper at 5842 | ||
|
| [#] = return to previous prompt | ||
|
| • Low Battery at 5842 | ||
|
|
| 0 = disable | |
|
|
| • AC loss at 5842 (if supported by the specific wireless dialer being | |
|
|
| 1 = enable | |
|
|
| installed) | |
|
|
|
| |
|
|
|
| • Line Cut at 5842 (if supported by the specific wireless dialer being |
|
|
|
| installed) |
|
|
|
| Enter [1] to enable 5842 Wireless Dialer trouble reports. Press [✻] to |
|
|
|
| advance to next field or [#} to return to the previous prompt. |
|
|
|
|
|
|
|
| Response to phone line tamper | Select the Lynx response to detection of a line cut at the 5842 Wireless |
| Ln |
| [✻] = continue | Dialer. |
|
| If the trouble sounder is enabled the system will sound a trouble event any | ||
|
| [#] = return to previous prompt | ||
|
| time the 5842 phone line is cut. | ||
|
|
| 0 = enable trouble sounder | |
|
|
| If the alarm sounder is enabled the system will a trouble by day or an | |
|
|
| 1 = enable alarm sounder | |
|
|
| alarm at night in the event that the 5842 phone line is cut. | |
|
|
|
| Enter [1] to select alarm or [0] to select trouble in the event of a 5842 line |
|
|
|
| cut. Press [✻] to advance to next field or [#} to return to the previous |
|
|
|
| prompt. |
|
|
|
| Note: If an |
|
|
|
| *55 has been enabled, the device response will be dependent upon |
|
|
|
| the selection made in *55 Field "Ln". |
|
|
|
|
|
|
|
| Enable | Allows Lynx to do |
| Eb |
| [✻] = continue | to enable |
|
| guide for additional information. | ||
|
| [#] = return to previous prompt | ||
|
|
| ||
|
|
| 0 = disable | Enter [0] to disable |
|
|
| 1 = enable | |
|
|
| prompt. | |
|
|
|
| Note: Lynx must be connected to the premises phone line via the 5842 |
|
|
|
| Wireless Dialer. |
|
|
|
|
|