HP 2140 Fax manual Memory Received, Transmission on

Models: 2140 Fax

1 69
Download 69 pages 21.11 Kb
Page 50
Image 50

 

LCD error messages

(continued)

 

 

 

Display

Status/Solution

 

 

Memory Full

Memory has become full while scanning a document. Press OK

Press OK to continue

to send or copy the scanned pages only. To cancel the job press

 

Cancel and try again when memory becomes available, or split

 

the new document into smaller parts. See Clearing memory on

 

page 36.

 

 

Memory Received

The machine has data stored in memory. Replace the print

Ink Low. Install new

cartridge with new one in order to print the faxes.

ink cartridge

 

 

 

Memory Received

Load paper and press OK. There might be a jam. Clear the jam

Load paper and

as described in Paper jams during printing on page 41.

press OK

 

 

 

Memory Received

There is no print cartridge in the machine. Install a print cartridge.

Install ink

 

cartridge

 

 

 

No answer from

The other machine has not answered after all redial attempts to

remote fax

send a fax.

 

 

No CID Number

The machine could not detect the CID (Caller ID) number.

 

 

No Dial Number

There is no number in the redial memory.

 

 

Not available while

The machine could not receive a new fax while printing the

reprinting fax

stored faxes.

 

 

Not Found

The number you are searching for does not exist in memory.

 

 

Number already

The number you are trying to enter already exists in the phone

registered

book or junk fax list.

 

 

Number Not Assigned

There is no number assigned to this One-Touch or two-digit

 

Speed number.

 

 

Poll Code Error

The remote user entered the wrong poll code.

 

 

Poll job exists

You have already programmed a polling send. Cancel scheduled

already

job and try again.

 

 

Polling Error

The machine you want to poll is not ready to answer your poll.

Check remote site

Check with the other person.

 

 

Receiving Error.

There is an error while receiving a fax.

Ask sender to

 

try again.

 

 

 

Remove jammed

The document you are sending has jammed in the document

document

feeder. To clear the document jam, see Document jams during

 

transmission on page 41.

 

You tried to copy or fax a document which is longer than 390 mm

 

(15.4 in.).

 

 

Care and maintenance

47

Page 50
Image 50
HP 2140 Fax manual Memory Received, Transmission on