Menu item

Description

Recycled

Specifies a paper type when the Recycled setting is selected in other menus

Paper

Notes:

Card Stock

• Paper is the factory default setting.

Transparency

• The custom media type must be supported by the selected tray or

Labels

Envelope

multipurpose feeder in order to print from that source.

• Single-sided paper labels designed for laser printers are supported for

 

 

occasional use: no more than 20 pages a month. Vinyl, pharmacy, and

 

dual-web labels are not supported.

 

 

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

 

Menu item

 

Description

 

 

Units of Measure

 

Identifies the units of measure

 

 

Inches

 

Notes:

 

 

Millimeters

 

 

 

 

• Inches is the US factory default setting.

 

 

 

 

 

 

 

 

• Millimeters is the international factory default setting.

 

 

 

 

 

 

 

Portrait Width

 

Sets the portrait width

 

 

3–14 inches

 

Notes:

 

 

76–360 mm

 

 

 

 

• If the width exceeds the maximum, the printer uses the maximum

 

 

 

 

 

 

 

 

width allowed.

 

 

 

 

• 8.5 inches is the US factory default setting. Inches can be increased

 

 

 

 

in 0.01-inch increments.

 

 

 

 

• 216 mm is the international factory default setting. Millimeters can

 

 

 

 

be increased in 1-mm increments.

 

 

 

 

 

 

 

Portrait Height

 

Sets the portrait height

 

 

3–14 inches

 

Notes:

 

 

76–360 mm

 

 

 

 

• If the height exceeds the maximum, the printer uses the maximum

 

 

 

 

 

 

 

 

height allowed.

 

 

 

 

• 14 inches is the US factory default setting. Inches can be increased in

 

 

 

 

0.01-inch increments.

 

 

 

 

• 356 mm is the international factory default setting. Millimeters can

 

 

 

 

be increased in 1-mm increments.

 

 

 

 

 

 

 

Feed Direction

 

Specifies the feed direction if the paper can be loaded in either direction

 

Short Edge

 

Notes:

 

Long Edge

 

 

 

• Short Edge is the factory default setting.

 

 

 

 

 

 

• Long Edge appears only if the longest edge is shorter than the

 

 

 

maximum width supported in the tray.

 

 

Understanding printer menus

103