Menu item

Description

 

 

Network Buffer

Sets the size of the network input buffer

 

 

Auto

Notes:

 

 

3K to <maximum size allowed>

 

 

Auto is the factory default setting.

 

 

 

 

 

 

The value can be changed in 1-K increments.

 

 

 

The maximum size allowed depends on the amount of memory in the printer,

 

 

 

 

the size of the other link buffers, and whether Resource Save is set to On or

 

 

 

 

Off.

 

 

 

To increase the maximum size range for the Network Buffer, disable or reduce

 

 

 

 

the size of the parallel, serial, and USB buffers.

 

 

 

Changing this setting from the printer control panel and then exiting the

 

 

 

 

menus causes the printer to restart. The menu selection is updated.

 

 

 

 

 

 

Job Buffering

Temporarily stores jobs on the printer hard disk before printing. This menu only

 

 

Off

appears if a formatted disk is installed.

 

 

On

Notes:

 

 

Auto

Off is the factory default setting.

 

 

 

 

 

 

The On value buffers jobs on the printer hard disk. This menu selection appears

 

 

 

 

only when a formatted disk is installed and is not defective.

 

 

 

The Auto setting buffers print jobs only if the printer is busy processing data

 

 

 

 

from another input port.

 

 

 

Changing this setting from the printer control panel and then exiting the

 

 

 

 

menus causes the printer to restart. The menu selection is updated.

 

 

 

 

 

 

Mac Binary PS

Sets the printer to process Macintosh binary PostScript print jobs

 

 

On

Notes:

 

 

Off

 

 

Auto is the factory default setting.

 

 

Auto

 

 

The Off setting filters print jobs using the standard protocol.

 

 

 

 

 

 

The On setting processes raw binary PostScript print jobs.

 

 

 

 

 

 

Std Network Setup

For descriptions and settings of the network setup menus, see the following:

 

Reports or Network Reports

“Network Reports menu” on page 108

 

Network Card

“Network Card menu” on page 108

 

TCP/IP

“TCP/IP menu” on page 108

 

IPv6

 

“IPv6 menu” on page 110

 

AppleTalk

 

“Wireless menu” on page 110

 

NetWare

 

“AppleTalk menu” on page 111

 

LexLink

 

“NetWare menu” on page 111

 

Net <x> Setup

 

“LexLink menu” on page 112

 

Reports or Network Reports

 

Note: The Wireless menu appears only when the printer is connected to a wireless

 

Network Card

 

network.

 

TCP/IP

 

 

 

 

 

IPv6

 

 

 

 

Wireless

 

 

 

 

AppleTalk

 

 

 

 

NetWare

 

 

 

 

LexLink

 

 

 

 

 

 

 

 

Understanding printer menus

107