| Menu item | Description |
|
| NPA Mode | Sets the printer to perform the special processing required for bidirectional |
|
| On | communication following the conventions defined by the NPA protocol |
|
| Off | Notes: |
|
| Auto | • Auto is the factory default setting. |
|
|
|
| |
|
| • Changing this setting from the printer control panel and then exiting the menus |
|
|
| causes the printer to restart. The menu selection is updated. |
|
|
|
|
|
| USB Buffer | Sets the size of the USB input buffer |
|
| Disabled | Notes: |
|
| Auto |
| |
| • Auto is the factory default setting. |
| |
| 3K to <maximum size allowed> |
| |
| • The Disabled setting turns off job buffering. Any jobs already buffered on the |
| |
|
|
| |
|
| disk are printed before normal processing is resumed. |
|
|
| • The USB buffer size value can be changed in |
|
|
| • The maximum size allowed depends on the amount of memory in the printer, |
|
|
| the size of the other link buffers, and whether the Resource Save setting is On |
|
|
| or Off. |
|
|
| • To increase the maximum size range for the USB Buffer, disable or reduce the |
|
|
| size of the parallel, serial, and network buffers. |
|
|
| • Changing this setting from the printer control panel and then exiting the menus |
|
|
| causes the printer to restart. The menu selection is updated. |
|
|
|
|
|
| Job Buffering | Temporarily stores jobs on the printer hard disk before printing |
|
| Off | Notes: |
|
| On |
| |
| • Off is the factory default setting. |
| |
| Auto |
| |
| • The On setting buffers jobs on the printer hard disk. |
| |
|
|
| |
|
| • The Auto setting buffers print jobs only if the printer is busy processing data |
|
|
| from another input port. |
|
|
| • Changing this setting from the printer control panel and then exiting the menus |
|
|
| causes the printer to restart. The menu selection is updated. |
|
|
|
|
|
| Mac Binary PS | Sets the printer to process Macintosh binary PostScript print jobs |
|
| On | Notes: |
|
| Off |
| |
| • Auto is the factory default setting. |
| |
| Auto |
| |
| • The Off setting filters print jobs using the standard protocol. |
| |
|
|
| |
|
| • The On setting processes raw binary PostScript print jobs. |
|
|
|
|
|
| USB With ENA | Sets the network address, netmask, or gateway information for an external print | |
| ENA Address | server that is attached to the printer using a USB cable. | |
| ENA Netmask | Note: This menu item is available only if the printer is attached to an external print | |
| ENA Gateway | server through the USB port. | |
|
|
|
|
Understanding printer menus
113