Network/Ports menu
Active NIC menu
Menu item | Description | |
Active NIC | Notes: | |
Auto | • Auto is the factory default setting. | |
<list of available network cards> | ||
• This menu item appears only if an optional network card is installed. | ||
| ||
|
|
Standard Network or Network <x> menus
Note: Only active ports appear in this menu; all inactive ports are omitted.
| Menu item | Description |
|
| PCL SmartSwitch | Sets the printer to automatically switch to PCL emulation when a print job requires |
|
| On | it, regardless of the default printer language |
|
| Off | Notes: |
|
|
| • On is the factory default setting. |
|
|
| • When the Off setting is used, the printer does not examine incoming data. |
|
|
| • When the Off setting is used, the printer uses PostScript emulation if PS |
|
|
| SmartSwitch is set to On. It uses the default printer language specified in the |
|
|
| Setup menu if PS SmartSwitch is set to Off. |
|
|
|
|
|
| PS SmartSwitch | Sets the printer to automatically switch to PS emulation when a print job requires |
|
| On | it, regardless of the default printer language |
|
| Off | Notes: |
|
|
| • On is the factory default setting. |
|
|
| • When the Off setting is used, the printer does not examine incoming data. |
|
|
| • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch |
|
|
| is set to On. It uses the default printer language specified in the Setup menu |
|
|
| if PCL SmartSwitch is set to Off. |
|
|
|
|
|
| NPA Mode | Sets the printer to perform the special processing required for bidirectional |
|
| Off | communication following the conventions defined by the NPA protocol |
|
| Auto | Notes: |
|
|
| • Auto is the factory default setting. |
|
|
| • Changing this setting from the printer control panel and then exiting the |
|
|
| menus causes the printer to restart. The menu selection is updated. |
|
|
|
|
|
Understanding printer menus
106