MAKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.
Unexpected page breaks occur
Increase the Print Timeout value:
1From the printer control panel, press 
.
2Press the arrow buttons until 
Settings appears, and then press 
.
3Press the arrow buttons until 
Setup Menu appears, and then press 
.
4Press the arrow buttons until 
Timeouts appears, and then press 
.
5Press the arrow buttons until 
Print Timeout appears, and then press 
.
6Press the arrow buttons until the value you want appears, and then press 
.
Solving option problems
Settings chosen from the software program or application can change or override settings chosen from the printer control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control panel.
Option does not operate correctly or quits after it is installed
These are possible solutions. Try one or more of the following:
RESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
CHECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Check the connection between the option and the printer.
4Connect the power cord to a properly grounded wall outlet.
MAKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it. For more information, see the hardware setup documentation that came with the option.
Troubleshooting
174