Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:
•Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
•Provide a flat, sturdy, and stable surface.
•Keep the printer:
–Away from the direct airflow of air conditioners, heaters, or ventilators
–Free from direct sunlight, humidity extremes, or temperature fluctuations
–Clean, dry, and free of dust
•Allow the following recommended amount of space around the printer for proper ventilation:
1 | Right Side | 31 cm (12 in.) |
|
|
|
2 | Left Side | 31 cm (12 in.) |
|
|
|
3 | Front | 51 cm (20 in.) |
|
|
|
4 | Rear | 31 cm (12 in.) |
|
|
|
5 | Top1 | 137 cm (54 in.) |
1Allows for addition of all output options.
Learning about the printer
12