Fax setup

Chapter 10

4Remove the white plug from the port labeled "2-EXT" on the back of your HP all- in-one.

5If your PC modem software is set to receive faxes to your computer automatically, turn off that setting.

Caution If you do not turn off the auto fax receive setting in your PC modem software, your HP all-in-one will not be able to receive faxes.

6(Optional) Connect a phone to the other open phone port on the parallel splitter.

7Set up the HP all-in-one to answer incoming calls manually. Press the Auto Answer button until the light is off.

8Run a fax test. For information, see Test your fax setup.

You must be available to respond in person to incoming fax calls, or your HP all-in-one cannot receive faxes. For information on receiving faxes manually, see Receive a fax manually.

Set up your HP all-in-one to a computer with two phone ports

Back view of the HP all-in-one

1 Telephone wall jack

2"IN" phone port on your computer

3"OUT" phone port on your computer

4Telephone

5 Computer with modem

6 Phone cord supplied in the box with your HP all-in-one connected to the "1-LINE" port

To set up your HP all-in-one to a computer with two phone ports

1Remove the white plug from the port labeled "2-EXT" on the back of your HP all- in-one.

2Find the phone cord that connects from the back of your computer (your PC modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled "2-EXT" on the back of your HP all-in-one.

3Connect a phone to the "OUT" port on the back of your PC modem.

98

HP Officejet 7300/7400 series all-in-one