Chapter 7
Use the copy features
1Make sure you have paper loaded in the input tray.
2Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the photo is along the front edge of the glass.
3Press Reduce/Enlarge and then press 0.
This displays the Reduce/Enlarge menu and then selects Poster.
4Press to highlight a page width for the poster, and then press OK. The default poster size is two pages wide.
5Press Start Copy Black or Start Copy Color.
After you select the poster width, the HP
Tip If the original cannot be enlarged to the selected poster size because it exceeds the maximum zoom percentage, an error message appears that tells you to try a smaller width. Select a smaller poster size and make the copy again.
You can be even more creative with your photos by using the HP Image Zone software that came with your HP
You can copy an image or text onto an
Tip Practice applying an
1Load the
2Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the photo is along the front edge of the glass.
3In the Copy area, press Menu, and then press 3.
This displays the Copy Menu and then selects Paper Type.
4Press to highlight
Note Select
5Press Start Copy Black or Start Copy Color.
Note When you select
66 | HP Officejet 7300/7400 series |