Troubleshooting information
Chapter 16
To minimize interference from another wireless network, try changing channels.
●Move the HP
Solution
Your HP
➔If you are trying to use HP Instant Share while using a USB cable, reset the network settings on the HP
Note For more information on resetting network settings, see the Network Guide that came with your HP
Failed to connect to HP Instant Share
Solution
The domain name server (DNS) did not have an entry for the URL.
➔Check the DNS settings, then try the task again later.
To check the DNS IP address
1Press Setup on the control panel of your HP
2Press 8, and then press 1.
This selects Network and then View Network Settings. The Network Settings menu appears.
3Press 1 to select Print Detailed Report.
The network configuration page prints on your HP
4Find the DNS Server information and verify that the IP address of the network's domain name server is accurate.
Call your Internet Service Provider (ISP) to verify the DNS address.
5If it is invalid, access the embedded Web server (EWS) and enter the correct IP address.
To enter information in the EWS
1Find the device IP Address on the network configuration page.
2Enter the device IP Address into the Address field on a browser on your computer.
The EWS Home page appears in your browser window.
3Click the Networking tab.
4Using the sidebar navigation, find the information you are looking to change and enter the correct information.
For more information, see the HP Officejet 7300/7400 series
200 | HP Officejet 7300/7400 series |