Chapter 16

Troubleshooting information

Figure 6

1 Handle

2 Pick assembly

This provides easy access to the rollers (3) and separator pad (4), as shown in Figure 7.

Figure 7

3 Rollers

4 Separator pad

2Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess liquid from the cloth.

3Use the damp cloth to wipe any residue off the rollers or separator pad.

4If the residue does not come off using distilled water, try using isopropyl (rubbing) alcohol.

5Use the blue-green handle to lower the pick assembly.

To reattach the face plate to the front of the automatic document feeder

1As shown in Figure 8, hook the face plate onto the left side of the HP all-in-one so that the plastic catch (2) on the far left inside of the face plate catches on the notch (1) on the front of the automatic document feeder.

196

HP Officejet 7300/7400 series all-in-one