Use the copy features
Chapter 7
color and photo print cartridges installed, you have a
Warning In order to make a borderless copy, you must have photo paper (or other specialty paper) loaded. If the HP
1Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray.
Note If your HP
2Load your original photo face down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass.
3Press Start Copy Color.
The HP
Tip If the output is not borderless, then set the paper size to 5x7 Borderless or 4x6 Borderless, set the paper type to Photo Paper, set the Photo enhancement, and then try again.
For more information on setting the paper size, see Set the copy paper size. For information on setting the paper type, see Set the copy paper type.
For information on setting the Photo enhancement, see Enhance light areas of your copy.
Copy a 10by 15cm (4by 6inch) photo onto aYou can use the Fill Entire Page setting to enlarge or reduce your original to fill the printable area of the paper size loaded in the input tray. In this example, Fill Entire Page is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a
Note In order to achieve a borderless print without changing the proportions of the original, the HP
60 | HP Officejet 7300/7400 series |