Troubleshooting information

Chapter 16

6 When prompted, press 1 for Yes or 2 for No.

Print a Self-Test Report to confirm the language and country/region:

1Press Setup.

2Press 1, and then press 4.

This selects Print Report, and then selects Self-Test Report.

The wrong measurements are showing in menus on the color graphics display Solution

You may have selected the incorrect country/region when setting up your HP all- in-one. The country/region you select determines the paper sizes shown on the color graphics display.

To change the country/region, you must first set the default language again. Usually, you set the language and country/region when you first set up the HP all- in-one. However, you can change these settings at any time by using the following procedure:

1Press Setup.

2Press 7, and then press 1.

This selects Preferences, and then selects Set Language & Country/Region. A list of languages appears. You can scroll through the list of languages by pressing the and arrows.

3When your language is highlighted, press OK.

4When prompted, press 1 for Yes or 2 for No.

The countries/regions for the selected language appear. Press or to scroll through the list.

5Use the keypad to enter the two-digit number for the appropriate country/ region.

6When prompted, press 1 for Yes or 2 for No.

Print a Self-Test Report to confirm the language and country/region:

1Press Setup.

2Press 1, and then press 4.

This selects Print Report, and then selects Self-Test Report.

I received a message on the color graphics display to align the print cartridges Solution

The HP all-in-one prompts you to align cartridges every time you install a new print cartridge. For more information, see Align the print cartridges.

Note If you remove and reinstall the same print cartridge, the HP all-in-one will not prompt you to align the print cartridges. The HP all-in-one remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

I received a message on the color graphics display that the print cartridge alignment failed

Cause

The incorrect type of paper is loaded in the input tray.

170

HP Officejet 7300/7400 series all-in-one