3Do one of the following:

–Press 1 to cancel the scheduled fax.

This selects Cancel scheduled fax. Your scheduled fax is cancelled.

–Press 2 to change the time or number. This selects Set new time to send fax.

4If you pressed 2, enter the new send time and then press OK.

5Enter the new fax number, and then press Start Fax Black.

Send a fax from memory

You can scan a black-and-white fax into memory and then send the fax from memory. This feature is useful if the fax number you are trying to reach is busy or temporarily unavailable. The HP all-in-one scans the originals into memory and sends them once it is able to connect to the receiving fax machine. After the HP all-in-one scans the pages into memory, you can immediately remove the originals from the document feeder tray.

1Load your originals face up in the document feeder tray with the top of the page on the left.

Note Load your originals in the document feeder tray, and not on the glass. This feature is not supported if you load your originals on the glass.

2In the Fax area, press Menu. This displays the Fax Menu.

3Press 4 to select Scan and Fax.

4Enter the fax number by using the keypad, press a one-touch speed dial button, or press Speed Dial until the appropriate speed-dial entry appears.

5Press Start Fax Black.

Note If you press Start Fax Color, the fax will be sent in black and white and a message appears on the color graphics display.

The HP all-in-one scans the originals into memory and sends the fax when the receiving fax machine is available.

Send a fax using monitor dialing

Monitor dialing allows you to dial a number from the control panel as you would dial a regular telephone. This feature is useful when you want to use a calling card to charge the call and you need to respond to tone prompts while dialing. It also allows you to dial the number at your own pace, if necessary.

Note Make sure the volume is turned on, or you will not hear a dial tone. For information, see Adjust the volume.

1Load your originals face up in the document feeder tray with the top of the page on the left. If you are sending a single-page fax, you can also load it on the glass.

2Press Start Fax Black or Start Fax Color.

3If your original is loaded on the glass, press 1 to select Fax original from scanner glass.

4After you hear the dial tone, enter the number by using the keypad on the control panel.

5Follow any prompts that might occur.

Your fax is sent when the receiving fax machine answers.

features fax the Use

User Guide

107