Share a scanned image with friends and relatives (network-connected)

Share a scanned image by pressing Scan To on the control panel. To use the Scan To button, place an image face down on the glass, select a destination to which you want to send the image, and start the scan.

Before you can share a scanned image on a network-connected HP all-in-one, you must first have HP Image Zone installed on your computer. For more information on installing HP Image Zone on your computer, see the Setup Guide that came with your HP all-in-one.

1Load your original face down on the right front corner of the glass or (if you are using the document feeder tray) in the document tray.

2In the Scan area, press Scan To.

The Scan To menu appears on the color graphics display.

3Use the and arrows to highlight HP Instant Share. The Share Menu appears.

4Use the and arrows to highlight a destination to which you want to send your image.

5Press OK to select the destination and scan the image. The image is scanned and sent to the destination selected.

Send a scan to a memory card

You can send a scanned image as a JPEG image to the memory card that is currently inserted in one of the memory card slots on the HP all-in-one. This enables you to use the memory card features to generate borderless prints and album pages from the scanned image. It also enables you to access the scanned image from other devices that support the memory card.

Send a scan to a memory card loaded in your HP all-in-one (USB-connected)

You can send the scanned image as a JPEG image to a memory card. This section describes the process when your HP all-in-one is directly connected to your computer through a USB cable. Make sure you have a memory card inserted in the HP all-in-one.

1Load the original face down on the right front corner of the glass.

2In the Scan area, press Scan To.

A Scan To menu appears, listing various options or destinations. The default destination is whichever one you selected the last time you used this menu.

3Press to highlight Memory Card, and then press OK.

The HP all-in-one scans the image and saves the file to the memory card in the JPEG format.

Send a scan to a memory card loaded in your HP all-in-one (network- connected)

You can send a scanned image as a JPEG image to a memory card. This section describes the process when your HP all-in-one is connected to a network.

Note You can only send a scan to a memory card if the memory card is being shared across the network. See Control memory card security on a network for more information.

1 Load the original face down on the right front corner of the glass.

Scan

User Guide

71