Paper

Tips

 

 

HP papers

● HP Premium Paper: Locate the gray arrow on the nonprinting side

 

of the paper, and then slide the paper into the input tray with the

 

arrow side facing up.

 

● HP Premium Inkjet Transparency Film: Insert the film so that the

 

white transparency strip (with arrows and the HP logo) is on top and

 

is going into the input tray first.

 

Note The HP all-in-one might not automatically detect

 

transparency film if it is loaded incorrectly, or if you use

 

transparency film other than HP transparency film. For best

 

results, set the paper type to transparency film before printing

 

or copying onto transparency film.

 

● HP Iron-On Transfers: Flatten the transfer sheet completely before

 

using it; do not load curled sheets. (To prevent curling, keep transfer

 

sheets sealed in the original package until you are ready to use

 

them.) Locate the blue stripe on the nonprinting side of the transfer

 

paper and then manually feed one sheet at a time into the input tray

 

with the blue stripe facing up.

 

● HP Matte Greeting Cards, HP Photo Greeting Cards, or

 

HP Textured Greeting Cards: Insert a small stack of HP greeting

 

card paper into the input tray with the print side down; slide the stack

 

of cards forward until it stops.

 

 

Labels

Always use letter or A4 label sheets designed for use with HP inkjet

(for printing from a

devices (such as Avery inkjet labels), and make sure that the labels are

not more than two years old.

software application

only)

1 Fan the stack of labels to make sure none of the pages are sticking

 

together.

 

2 Place a stack of label sheets on top of full-size plain paper in the

 

input tray, label side down. Do not insert labels one sheet at a time.

 

 

Continuous banner

Continuous banner paper is also known as computer or z-fold paper.

paper

1 Remove the output tray.

(for printing from a

2 Remove all paper from the input tray.

software application

Note Leave the output tray off of the HP all-in-one while the

only)

banner prints to prevent the continuous banner paper from

 

 

tearing.

 

3 Verify that the stack of banner paper contains at least five pages in

 

the stack.

 

Note If you use non-HP banner paper, make sure you use 20-lb.

 

paper.

 

4 Carefully tear off the perforated edge strips from both sides of the

 

paper stack, if any, and unfold and refold the paper to make sure the

 

pages do not stick together.

 

 

paper load and originals Load

User Guide

37