Note The menus shown in this section may vary in content depending on your computer's operating system and which applications you set up as scan destinations in the HP Image Zone.

Scan an original (USB-connected)

Follow these steps if your HP all-in-one is directly connected to a computer through a USB cable.

1Load the original face down on the right front corner of the glass.

2In the Scan area, press Scan To.

The Scan To menu appears, listing destinations, including applications, for anything you scan. The default destination is whichever one you selected the last time you used this menu. You designate which applications and other destinations appear on the Scan To menu by using the HP Image Zone on your computer.

3To select an application to receive the scan, press its number on the control panel or use the arrow buttons to highlight it and then press OK or Start Scan.

A preview image of the scan appears in the HP Scan window on the computer, where you can edit it.

For more information about editing a preview image, see the onscreen HP Image Zone Help that came with your software.

4Make any edits to the preview image in the HP Scan window. When you have finished, click Accept.

The HP all-in-one sends the scan to the selected application. For example, if you chose the HP Image Zone, it automatically opens and displays the image.

Scan an original (network-connected)

Follow these steps if your HP all-in-one is connected to one or more computers over a network.

1Load the original face down on the right front corner of the glass.

2In the Scan area, press Scan To.

The Scan To menu appears, listing various options.

3Press 1 to choose Select Computer or use the arrow buttons to highlight it and then press OK.

The Select Computer menu appears, listing computers connected to the HP all- in-one.

Note The Select Computer menu may list computers with a USB connection in addition to those connected through the network.

4To select the default computer, press OK. To select another computer, press its number on the control panel or use the arrow buttons to highlight your selection and then press OK. To send the scan to an application on your computer, choose your computer in the menu.

The Scan To menu appears, listing destinations, including applications, for anything you scan. The default destination is whichever one you selected the last time you used this menu. You designate which destinations appear on the Scan To menu by using the HP Image Zone on your computer. For more information, see the onscreen HP Image Zone Help that came with your software.

5To select an application to receive the scan, press its number on the control panel or use the arrow buttons to highlight it and then press OK or Start Scan.

Scan

User Guide

69