If you have a parallel cable connection you may be able to increase photo printing speed by enabling Hardware ECP (Extended Capabilities Port). To do this:

1.Open the HP Deskjet Toolbox using one of the following methods:

Click Start > Programs > hp deskjet series > hp deskjet series Toolbox –or–

Right-click the TaskAgent and select Open Toolbox.

2.Click the Configuration tab and select Attempt to Use Hardware ECP.

3.Click Apply.

4.Print the photograph.

See also:

printing photographs

If you continue to have problems, contact HP Customer Care.

83

Page 85
Image 85
HP 948c, 920c, 940c manual Printing photographs