HP CQ35-406TU, CQ35-304TU Insert a memory module in the expansion memory slot, Close the cover

10.Insert a memory module in the expansion memory slot:

a. Align the notched edge (1) of the memory module with the tab in the memory module slot.

CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module.

b.With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.

c.Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place.

11.Align the tabs (1) on the memory module compartment cover with the notches on the computer.

12.Close the cover (2).

13.Tighten the 3 memory module compartment cover screws (3).

Adding or replacing memory modules 93