HP CQ35-303TX A disc does not play automatically, A movie stops, skips, or plays erratically

A disc does not play automatically

1.Select Start > Default Programs > Change AutoPlay settings.

2.Confirm that the Use AutoPlay for all media and devices check box is selected.

3.Click Save.

A disc should now start automatically when it is inserted into the optical drive.

A movie stops, skips, or plays erratically

●Press the Play button. You may have accidentally paused the movie.

●Clean the disc.

●Conserve system resources by trying the following suggestions:

◦Log off the Internet.

◦Change the color properties of the desktop:

1.Right-click on a blank area of the computer desktop, and select Screen resolution.

2.Select Advanced Settings > Monitor tab.

3.Select High Color (16 bit), if this setting is not already selected.

4.Click OK.

◦Disconnect external devices, such as a printer, scanner, camera, or handheld device.

A movie is not visible on an external display

1.If both the computer display and an external display are turned on, press fn+f4 one or more times to switch between the 2 displays.

2.Configure the monitor settings to make the external display primary:

a.Right-click on a blank area of the computer desktop, and select Screen resolution.

b.Specify a primary display and a secondary display.

NOTE: When using both displays, the movie image will not appear on any display designated as the secondary display.

To get information about a multimedia question not covered in this guide, go to Start > Help and Support.

The process of burning a disc does not begin, or it stops before completion

●Be sure that all other programs are closed.

●Turn off Sleep mode and Hibernation.

●Be sure that you are using the right kind of disc for your drive. See your user guides for more information about disc types.

Troubleshooting 51