HP LN17ps kug-ch06Page 15 Thursday, March 6, 1997 4:48 PM, Main Tray, Mailbox Jam, Main Tray Jam, Main Tray Out, Lwr1-Lwr2-Main, Main-FrontTray, Main Tray Fail

kug-ch06 Page 15 Thursday, March 6, 1997 4:48 PM

		C o n t r o l P a n e l M e s s a g e s
Table 6.2 Control Panel messages (continued)
Message		Description/Corrective Action
Lwr1-Lwr2-Main	Paper needs to be loaded in both lower trays or the main tray.
	ACTION:	The message on the bottom line of the Control Panel display advises
		what size paper to load.
Mailbox Failure	The Mailbox/Collator has failed. Printing to the Mailbox/Collator cannot continue.
	You can, however, send output to the standard output tray.
	ACTION:	Remove the Mailbox/Collator following the instructions in
		Appendix C: Installing and Removing Printer Options. If the problem is
		not resolved, contact your dealer or Digital.
Mailbox Jam-	Paper has jammed feeding to the Mailbox/Collator. The message alternates with:
Open Mailbx Door	Clear Paper Path
	ACTION:	Open the Mailbox/Collator’s rear cover and pull out the jammed paper.
		Then close the Mailbox/Collator’s rear cover. See “Mailbox/Collator
		Jam” (page 6-30).
Main-Front Tray	Paper needs to be loaded into the Main or Front Trays.
	ACTION:	The message on the bottom line of the Control Panel display advises
		what size paper to load.
Main Tray	Paper needs to be loaded into the main tray.
	ACTION:	The message on the bottom line of the Control Panel display advises
		what size paper to load.
Main Tray Empty	The main tray is empty.
	ACTION:	Reload the correct size paper.
Main Tray Fail	The main tray has failed. Printing cannot continue from this tray.
Service Required	ACTION:	Contact your dealer or Digital.
Main Tray Jam-	Paper has jammed feeding from the main tray. The message alternates with:
Open Main Tray	Open Front Cover
	Remove Jam Sheet
	ACTION:	Remove the main tray, open the front cover and pull out the jammed
		paper. Then replace the main tray and close the front cover. See “Main
		Tray Jam” (page 6-27).
Main Tray Out	The main tray has been removed (or is not pushed in all the way) from the printer.
	ACTION:	Insert the main tray into the printer.
		Table 6.2 Page 10 of 19

C h a p t e r 6 : T r o u b l e s h o o t i n g ❖ 6-15