HP LN17ps manual Operational Safety, Kug-apph Page 6 Thursday, March 6, 1997 457 PM

kug-apph Page 6 Thursday, March 6, 1997 4:57 PM

E n v i r o n m e n t a l S p e c i f i c a t i o n s

Operational Safety	Your Digital equipment and supplies were designed and
	tested to meet strict safety requirements. These include safety
	agency examination, approval, and compliance with
	established environmental standards.
	Attention to the following notes ensures the continued safe
	operation of your equipment.
	Always connect the equipment to a properly grounded power
	source receptacle. If in doubt, have the receptacle checked by
	a qualified electrician.
	WARNING: Improper connection of the equipment
	grounding conductor can result in electrical shock.
	Always follow all warnings and instructions marked on, or
	supplied with, the equipment.
	Always locate the equipment on a solid support surface with
	adequate strength for the weight of the machine.
	Always exercise care in moving or relocating the equipment.
	Always place the equipment in an area which provides
	adequate room area for ventilation and servicing.
	Always use the materials and supplies specifically designed
	for your Digital equipment. Use of unsuitable materials may
	result in poor performance and, possibly, a hazardous
	situation.
	Never use a ground adaptor plug to connect the equipment to
	a power source receptacle that lacks a ground connection
	terminal.
	Never attempt any maintenance function that is not
	specifically described in this documentation.
	Never obstruct ventilation openings. These are provided to
	prevent overheating.
	Never install the equipment near a radiator or any other heat
	source.

H-6❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e