kug-appb Page 7 Thursday, March 6, 1997 4:50 PM

R e p l a c i n g t h e F u s e r C a r t r i d g e / B T R

8 Secure the fuser cartridge by replacing

9 Insert the Duplex Module through the

the mounting screws that were removed

guide channels.

in Step 5 on page B-6.

 

If you do not need to re-install the Duplex

Module, close the rear cover and skip to

Step 11.

10 Make sure the green side-locks at both

11 Open the front cover and remove the

ends click into position. Then close the

EP cartridge by lifting it towards the rear

rear cover.

of the printer then pulling it up and out.

A p p e n d i x B : R e p l a c i n g C o n s u m a b l e s ❖ B-7