kug-appc Page 6 Thursday, March 6, 1997 4:51 PM

M e m o r y S I M M s

4 Select an appropriate SIMM slot to use.

Slots SIM2 (A) and SIM3 (B) are interchangeable and are used for installing additional printer memory.

6 Make sure that the clips on either side snap closed to lock the SIMM in place.

5 Insert the new SIMM at an angle into the appropriate SIMM slot and rotate it up into position.

7 Replace the controller board, sliding it along the alignment channels. Then hand-tighten the thumb screws.

C-6❖ L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e