HP LN17ps manual Kug-ch06 Page 21 Thursday, March 6, 1997 448 PM, Remove Jam Envel

kug-ch06 Page 21 Thursday, March 6, 1997 4:48 PM

		C o n t r o l P a n e l M e s s a g e s
Table 6.2 Control Panel messages (continued)
Message		Description/Corrective Action
Remove Jam Envel	An Envelope Feeder jam has occurred. The message alternates with the messages:
	EnvelFeeder Jam-
	Remove All Envel
	and:
	Remove EnvFeeder
	Open Front Cover
	ACTION:	See “Envelope Feeder Jam” (page 6-29).
Remove Output	The Offset Catch Tray (OCT) is full. Printing cannot continue to the OCT.
from Offset Tray	ACTION: Remove the output from the OCT.
Remove Output	Mailbox bin N is full. Printing cannot continue to bin N.
from Mailbox N	ACTION:	Remove the output from bin N. Press the unlock bin button, then
		enter the password, if requested.
Remove Output	The standard output tray is full. Printing cannot continue.
from Std. Tray	ACTION:	Remove the output from the standard output tray.
Remove PrintCart	A paper jam has occurred. The message alternates with the message:
Clear Paper Path	Paper Jam-
	Open Front Cover
	ACTION:	See “Print Cartridge Jam” (page 6-31).
Replace	The Fuser Cartridge has reached End of Life.
Fuser Cartridge	ACTION:	Order a new Fuser Cartridge (see Appendix A: Ordering Printer
		Options) and replace as per the instructions in Appendix B: Replacing
		Consumables.
Replace	The EP cartridge, which contains toner and drum, has expired. Printing cannot
Print Cartridge	resume.
	ACTION:	Insert new EP cartridge.
*Res. Change*	The printer is printing the job at a lower resolution than requested because there is
	not enough memory available.
	ACTION:	Add printer memory.
*Res& Smplx Chg*	The printer has changed the job resolution, and changed a duplex job to simplex,
	because there is not enough memory to process the job at the higher resolution
	and duplex.
		Table 6.2 Page 16 of 19

C h a p t e r 6 : T r o u b l e s h o o t i n g ❖ 6-21